Ваш персональный менеджер CONTACTS Тел: +38 (099) 22 80 010
e-mail: sbyt@yugstal.com
Ask a Question

Reinforcement welded mesh

Минимальный объем заказа от:5 ton

Calculate the cost
сетка кладочная цена

Reinforcement welded mesh

Минимальный объем заказа от:5 ton
сетка кладочная цена

Cost calculation

Choose basic options



General information

Welded Mesh Fabric Reinforcement is manufactured using cold-rolled deformed wire, electrically resistance welded at the intersections of the longitudinal and transverse wires at the required mesh spacing with minimal loss of strength and cross-sectional area.

Diameter 2,5-16 mm.
Wire spacing 50-200 mm.
Sheets 0.5×2 m, 1×2 m.

Welded Mesh Fabric is specified and manufactured according to Standard Specifications making for easy site identification, quality control and management.

Welded Mesh Fabric is generally used in surface beds (concrete floor slabs on fill) and road pavements, mesh can also be used in suspended floor slabs, concrete retaining walls, box culverts and drains, precast stadium seating, tilt-up wall panels to name a few.

Using welded mesh drastically speeds up the construction process.

Welded mesh is available in wide range of wire diameters each suited for a particular reinforcing design application
Depending on job requirements welded mesh can be designed either in flat sheets, rolls or bent to suit
The deformed wire used in the production of welded mesh improves concrete adhesion. The wire has a minimum proof stress of 485MPa and a tensile strength of 510MPa as per BS4482 Standard Specification requirements
Welded mesh can be used at higher stresses than that of high tensile rebar, resulting in an 8% overall material saving
Due to its rigid nature, concrete cover can be controlled more accurately on site
Welded mesh is manufactured in strict accordance to Standard Specifications as well as to international standard specifications on request
Where there is a significant amount of repetition, conventional bar reinforcement can be substituted with pre-manufactured designed mesh resulting in easier controls, speed of installation, reducing offcuts and wastage.