Your personal manager CONTACTS Тел: 38 (099) 228 00 20
38 (067) 497 48 62
e-mail: sbyt@yugstal.com
Ask a Question

Wire rod

Minimum order quantity from:5 ton

Calculate the cost
катанка Запорожье

Wire rod

Minimum order quantity from:5 ton
катанка Запорожье

Cost calculation

Choose basic options



General information

Wire rod by IS 2879:1998, IS 7904:1995, IS 7887:1992

Technical parameters of the wire rod

  • Diameter of wire rod 5,5-14,0 mm.
  • Mass 1100-2100 kg.
  • Height (max) 1750 mm.
  • Outer Diameter (max) 1250 mm.
  • Inner Diameter (min) 750 mm.

Packaging

Coils up to 1100-2100 kg have 4 or 8 bindings with wire of 5.5 – 8.0 mm

Marking

Each coil is marked with two labels indicating the following:
– trade mark of the manufacturer;
– steel grade;
– heat and lot numbers;
– size (diameter);
– mass, kg (for coils with mass to 1100-2100 kg);
– country of destination of products.

COMMERCIAL-QUALITY CARBON STEEL WIRE ROD DSTU 2770-94 (GOST 30136-95)
Limit deviation:
– for diameter +0,3/- 0,5 mm;
– for ovality max. 50% of the sum of limit deviations.

CARBON STEEL WIRE ROD FOR WIRE DRAWING ASTM А 510М
CARBON STEEL WIRE ROD OF ROUND SECTION
SOU MPP 77.140-236:2008
Limit deviation:
– for diameter ± 0,4 mm;
– for ovality max. 0,60 mm.

ROPE STEEL WIRE ROD
DSTU 3683-98 and similar products as per ASTM А 510М
Product mix: 5.5-9.5 mm
Limit deviation:
– for diameter +0,3/- 0,5 mm;
– for ovality max. 50 % of the sum of limit deviations.

LOW-CARBON AND ALLOY STEEL WIRE ROD FOR MANUFACTURING OF WELDING WIRE
TU 14-15-345-94, TU 14-15-346-94, TU U 27.1-4-548-2003,
TU U 27.1-24432974-020:2010
Limit deviation:
– for diameter +0,3/- 0,5 mm;
– for ovality max. 50 % of the sum of limit deviations.